High Temperature Probes

 

 

High Temperature Probes

High Temperature Probes

 

High Temperature Probes for a range of applications where standard epoxy thermistor will not tolerate the ambient temperature. Range of hi reliability glass thermistor offer stability at higher temperatures.

 

High Temp Probes 200°C

Glass NTC thermistor packaged in a Stainless steel housing, for mechanical protection, using Silicon sheathed jacket with FEP insulated wires. Double radial crimp applied to ensure strain relief. The insulation also offers resistance to certain chemicals and UV resistant. A range of NTC resistances and tolerances are available to suit customer requirements

High Temp Probes 250°C

Glass NTC thermistor packaged in Stainless steel housing using braided FEP insulated jacket with FEP insulated wires. Double radial crimp applied to ensure strain relief

Ultra High Temp Probe 500°C

Launching soon will be an ultra high temperature probe which can tolerate 500°C. Utilizing patented glass sintering this new NTC will offer design engineers the opportunity to replace RTD’s. Special hi temp ceramics will be used for protection.

Applications

  • Solar Roof sensors
  • Gas flame monitoring
26/11/2015 Thermal Components Technologies Comments Off on High Temperature Probes

Humidity Filters

 

humidity filters

 

New stainless steel humidity filters for harsh environments. A porous sintered head allows airflow but not environmental contaminants. Digital and analog humidity sensors are easily accommodated in the space provided. 316 stainless steel provides a long term durability. Detachable head allows for easy replacement in the field with 3 0r 4 pin connector system

09/11/2015 Thermal Components Technologies Comments Off on Humidity Filters

Deep Water Temperature Probe

 

Deep Water Temperature Probe

The Deep Water Temperature Probe is universally by Scientific and Meteorology organisations to reliably and accurately measure deep water temperatures. The deep sea probe is designed for long- term immersion at considerable depth using a stainless/ neoprene vulcanised seal with a moulded external splice protector. The deep water temperature probe can withstand the forces of pier mounting in high wave environments. The deep water temperature probe is ideal for applications that include deep water reservoirs, wetlands, wells and tidal stations.

Deep Water Temperature Probe

Deep Water Temperature Probe

 

 

 

 

Data Sheet

30/10/2015 Thermal Components Technologies Comments Off on Deep Water Temperature Probe

Pipe Temperature Probes

pipe clip temperature sensorIMG_TempSensor_Pipe Probe

 

Thermal Components  range of Pipe Temperature Probes offers HVAC engineers 2 new sensors that measure pipe surface temperature. These easy to fit clip on Temperature Probes are unique in performance necessary to measure straight and curved bend compressor and condenser coils for refrigeration applications. Available in a range of different NTC thermistor resistances. Pipe size is 3/8″ diameter. The sens-a-coil pipe temperature probes offers HVAC engineers the unique opportunity to measure the temperature on the bend of the return coil. In the past this has been difficult to achieve, however the patented system now is an easy clip on solution. Because the thermistor is housed in a small brass bulb which offers fast response time to refrigerant temperature changes.

The standard straight line pipe temperature probe offers an economical solution combined with fast response time through small diameter copper housing that is then overmoulded for mechanical and moisture protection.

09/10/2015 Thermal Components Technologies Comments Off on Pipe Temperature Probes

Pool Spa Temperature Probe

 

Pool/Spa Temperature Probe

 

Thermal Components new Pool Spa Temperature Probe features a rubber covered glass NTC temperature sensor encapsulated in a plastic housing . This offers superior waterproofing along with an easy push fit application iserted into a 3/8″ hole. This ensures a long field life and reduction in costs of replacement. Comes with a 4.5 Mtr lead length

 

Pool Spa Temperature Probe

09/10/2015 Thermal Components Technologies Comments Off on Pool Spa Temperature Probe

Thermistors for Medical Applications

Thermistors for Medical Applications have, for decades, and are still relative and reliable  which this field demands. Thermistors sensitivity and interchangeability are the necessary charateristics required for monitoring patient temperature. Patient temperature is measured using thermistors that are packaged in variety of probes such as skin(surface) rectal, esophageal and catheter probes for subcutaneous applications.

NTC thermistors are also used for measuring flow in inserted devices.  A pair of matched thermistors can be attached to the tip of a catheter which can be guided to different locations of the heart to measure blood flow. Either they can be heated by a coil of flushed with cold saline to measure blood flow rates. . When flushed with cold saline, the first sensor gets cooled more than the second because the blood flow warms up the saline that reaches the second sensor. . Since the two thermistor sensors are seperated by a known distance and the temperature and the volume of saline is controlled, the blood flow can be calculated by reading the outputs of the two sensors. When cold saline is used these thermistors do not require external power.

Catheter ablation sensors are another example of sensors temporarily inserted through incision to effect specific treatments and/or to take measurements during treatments. Ablation is the process  of selectively killing tissue  to create scar tissue in order to re-route  nerve impulse flow within the heart to correct abnormal arythmias. RF energy is often used in the ablation process. It is critical that the force applied by the catheter tip to the target tissue not exceed predetermined  values to avoid  any possibility of perforating the target tissue.

 

 

20/11/2012 Medical, Thermal Components Technologies Comments Off on Thermistors for Medical Applications

Glass Probe Thermistor

 

Glass Probe Thermistor – 8 Series

Ever had problems sourcing what thermistor to use in caustic liquid enviornments?

Solutions have been available, but never quite offering a device with a repeatable tight tolerance.

Thermal Component Technologies Glass probe 8 series thermistor are glass devices with standard electrical characteristics similar to the standard Glass A and B series thermistors with a 1% tolerance, however offering a longer sheath for direct immersion into liquids . The glass encapsulation offer superior stability and durability over time. The 8 series thermistor range is offered with dumet wires with/ without polyimide tubes for insulation. These NTC probes are ideal for harsh enviornments and suitable for potting into brass or stainless steel housings for locating in containers etc. They also offer the advantage of high temperature situations remaining stable to 325C, tolerating intermittent maximum of 550C. Series 8 offers thermistor sensitivity at high temperatures.

Design Engineers will appreciate the variety of applications that they will be able to use these probes for such as medical and chemical and will be especially suitable for laboratory temperature monitoring.

For more information contact contact sales@thermalcomponents.com.au

Technical Update:

Electricals
  • Resistance @ 25C  –  1K ohm ~ 231K ohm
  • Tolerance                –  from 1% ~ 20%
  • Beta Value               –  from 2668 K~ 4535 K
  • Temp range                   -50C ~ +300C

Features
  • Long glass probe offers moisture resistance for direct immersion
  • Resistance to  most chemicals
  • Available in custom probes
  • Interchangeable
Applications
  • HVAC
  • White Goods
  • Industrila. Instrumentation
  • Chemical Industry
  • Medical
26/10/2012 Thermal Components Products, Thermal Components Technologies Comments Off on Glass Probe Thermistor
Categories
Recent Posts
Archives